Kramer AV VM-214DT 4K60 HDMI and HDBaseT 2×1:4 Distribution Amplifier

Includes: Power cord
Condition: Sold as is – does power on but has not been connect to HDMI/Ethernet

Description

The Kramer VM-214DT is a distribution amplifier that can handle 4K60 4:2:0 resolution.  For inputs it can accept either a HDMI or HDBaseT input, a nice feature is that these inputs are auto switching so the unit will always switch to the active signal.  For outputs you have 4 HDBaseT outputs and 1 local HDMI mirroring out. The HDMI and HDBaseT input is ideal for a local HDMI source that is close, you can then use the HDBaseT input for any HDMI sources far away. The local HDMI output can be used for a monitor or to cascade additional units together.

There is an integrated audio de-embedder and automatic analog audio detection. Kramer offers advanced EDID management for plug and play operation to get your resolutions correct to your monitors. The HDBaseT connections have a distance of up to 590′ depending on the resolution being sent, the receiver used, and the cabling used. The unit can be controlled via the front panel buttons, RS-232, web pages, and IR. Indicator LED lights give quick and easy to read status.

The Kramer VM-214DT is a jack of all trades distribution amplifier that can handle HDMI and HDBaseT for a variety of applications while being able to handle 4K60 4:2:0.

Specifications

Resolution: Up to 4K60 4:2:0

HDCP and HDMI compliant

HDMI Support: Deep Color, x.v.Color and 3D

integrated audio de-embedder and automatic analog audio detection

HDBaseT distance: Up to 590′ depending on the resolution being sent, the receiver used, and the cabling used

LED indicator lights

System Range: Up to 130m (430ft) at normal mode (2K), up to 100m at normal mode (4K)

up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC HDKat6a cables

Maximum Data Rate: 10.2Gbps (3.4Gbps per graphic channel)

Control: Front panel buttons, RS-232, web pages, and IR

Dimensions: 17.18″ x 3.2″, 1.71″ (1RU)

Weight: 3.44lbs